2-boxing/running macros on the same comp.

DigitalMocking · Post by **DigitalMocking** » Tue Jun 14, 2005 7:26 pm

Leffe wrote:i run a 3.2ghz with 768ram and can have 2 sessions on it but when i try start a 3rd it usualy crashes the 3rd window... dont know why tho, useing Wineq.

You need more RAM

Lax · Post by **Lax** » Tue Jun 14, 2005 7:37 pm

There's no way a 3rd can start without having any RAM left, as DM is implying.

Leffe · Post by **Leffe** » Tue Jun 14, 2005 8:08 pm

ahh ok.... gonna have to run down to the hardware store then :?

fearless · Post by **fearless** » Tue Jun 14, 2005 8:49 pm

Leffe wrote:ahh ok.... gonna have to run down to the hardware store then :?

As in my post, you should generally allocate 512 per session. 2 sessions at 768 is pushing it, but doable. 1.2 and up is about where 3 sessions become feasable.

Lord_Vyper · Post by **Lord_Vyper** » Tue Jun 14, 2005 10:59 pm

Vid card can also come into the equation as well, assuming you're caring about whats on the screen.
My comp can run 4 EQ sessions without graphic artifacts/screw ups, while the gf's screen turns into a mass of grey blobs with 2 sessions. (256mb 9600XT vs some Geforce3 128MB PoS)

JimJohnson · Post by **JimJohnson** » Wed Jun 15, 2005 12:03 am

My 900 athlon runs 3 in OOW with only 768 ram 5200fx 128mb card zone times are extreamly slow but its possible. Just turn off all the shit you dont need.

Running 4 on 1.2 gigs ram isnt bad either long as you dont have all the worthless shit on. Spell effects max particle density so forth. Nothing of mine is top line either. athlon 1.6 fx5200 256 card 1.2 gig ram. As long as not raiding with more then 30ish in the area very little lag even with 4 on

Everdead · Post by **Everdead** » Wed Jun 15, 2005 5:27 pm

3 ghz processor, 256 Nvidia graph card, 2gig ram, 160gb hardrive I run up to 5 chars on that comp. But I get bleedover when just running three even had it the other day with 2 even.

TheWarden · Post by **TheWarden** » Wed Jun 15, 2005 8:31 pm

My old 800mhz P3 with 512mb of memory could run 2 sessions if all the added graphics were low/off (3 if I always had the 2 others minimized).

gimp · Post by **gimp** » Thu Jun 16, 2005 10:49 am

themowgli wrote:The reason I asked, was because I used a ranger autofire/forage bot that only worked on the screen that I was curently in. So, if I ran the bot on the ranger, but opened up Internet Explorer to go look up a recipe on EQTC, the bot would go to the EQTC window and stop working.

are you referring to the program autofire?

SiatX · Post by **SiatX** » Fri Jun 17, 2005 7:17 am

I run 4 toons on 1 box, 3.0Ghz, 2Gb ram, 256mb vid card. On WinEQ2 I've noticed some bleedovers, but nothing to the extent that is has bothered me. Trying to run a fifth toon just pops up a "Cant load another 3d session because there are no more video memory" hehe.

DigitalMocking · Post by **DigitalMocking** » Fri Jun 17, 2005 11:45 am

SiatX wrote:I run 4 toons on 1 box, 3.0Ghz, 2Gb ram, 256mb vid card. On WinEQ2 I've noticed some bleedovers, but nothing to the extent that is has bothered me. Trying to run a fifth toon just pops up a "Cant load another 3d session because there are no more video memory" hehe.

If you turn all the video options down, you can get 6 on that machine, I've done it on mine, about the same specs.

Night Hawk · Post by **Night Hawk** » Fri Jun 17, 2005 12:38 pm

Or..... you could go out and get a decent computer, and not have to worry about turning off any options

JimJohnson · Post by **JimJohnson** » Fri Jun 17, 2005 3:58 pm

Night Hawk wrote:Or..... you could go out and get a decent computer, and not have to worry about turning off any options

Unless your going to drop 4-5k on a pc your not going to run 5 toons with full options. And even with that price tag.. I think you will lag

gimp · Post by **gimp** » Sat Jun 18, 2005 8:58 am

SiatX wrote:Trying to run a fifth toon just pops up a "Cant load another 3d session because there are no more video memory" hehe.

WinEQ2 Preferences->EverQuest->General->Hide memory warnings: ON

Lax · Post by **Lax** » Sat Jun 18, 2005 11:18 am

gimp wrote:
SiatX wrote:Trying to run a fifth toon just pops up a "Cant load another 3d session because there are no more video memory" hehe.
WinEQ2 Preferences->EverQuest->General->Hide memory warnings: ON

No, that's not a warning.. that's a flat out fatal error. With no video memory remaining, you cant open another session, which is what the box pops up and says when he tries. Sure, he could hide the warnings that show up in text in the game, but will never be able to run another session