Rogue Helper v6.0 [Complete Rogue Macro] (Updated: 10-26-04)

noc · Post by **noc** » Thu Dec 02, 2004 9:04 am

Ok was using RH for a while and it worked great, after a reformat and reisntall, when i load rh into mq i get this error

Unparsable in Calculation: T
rh.mac@1159 (event_TogAuto(string Line)): /if ($(Line.arg[4] >0)
/varset assistpct $(Line.arg[4]}
rh.mac@277 (Main): :ForeverLoop
The current macro has ended
Failed to parse /if condition '(Toggle >0)', non-numeric encountered

also this when i use /rhhelp

/varset failed, variable 'dynclose'not found

i have a feeling im missing something simple so please laugh at me and then help me.

fearless · Post by **fearless** » Thu Dec 02, 2004 9:50 am

recopy it and redo your ini.

noc · Post by **noc** » Thu Dec 02, 2004 9:56 am

tried that about 3 times
would it help to post my ini file?

Even copied my EQ folder from a computer where the macro still works.

Mulletmaster · Post by **Mulletmaster** » Sun Dec 05, 2004 1:36 pm

when I change a setting like autostick and I type in /autostick off it keeps on spamming

[MQ2]** Auto-Sticking target is now OFF!
[MQ2]** Auto-Sticking target is now ON!
[MQ2]** Auto-Sticking target is now OFF!
[MQ2]** Auto-Sticking target is now ON!
[MQ2]** Auto-Sticking target is now OFF!
[MQ2]** Auto-Sticking target is now ON!
[MQ2]** Auto-Sticking target is now OFF!
[MQ2]** Auto-Sticking target is now ON!
[MQ2]** Auto-Sticking target is now OFF!

....and it keeps on going forever

dedpoet · Post by **dedpoet** » Mon Dec 06, 2004 11:45 am

I'm getting the exact same error. I hadn't posted yet because I figured I had to be missing something obvious and have been searching and searching to no avail. Some settings (like hide/sneak) work fine, but stick, pick pockets, and several others cause a continuous spam of turning the setting ON then OFF until I /end the macro.

I'm not an MQ noob, I've read all 38 pages of this post, and I'm using the latest posted code. Does anyone have any idea on this one?

n00bish · Post by **n00bish** » Mon Dec 06, 2004 1:12 pm

It seems to work fine for me.
using V6.0

Cr4zyb4rd · Post by **Cr4zyb4rd** » Mon Dec 06, 2004 2:55 pm

You are indeed missing something obvious. There are problems with the event parser in the past two source zips (that were introduced in an attempt to fix some "deeper" problems that people had already found ways to work around).

See the threads http://www.macroquest2.com/phpBB2/viewt ... 3&start=15 and http://www.macroquest2.com/phpBB2/viewt ... ght=events for further info.

n00bish · Post by **n00bish** » Tue Dec 07, 2004 5:25 pm

did a little more testing.
I can recreate what happens to you when I use the leash option ( when it echoes that it drove a stake in the ground)
but if I use leash option and set it to a player, it works fine.

just fyi.

Zazoot · Post by **Zazoot** » Wed Dec 08, 2004 1:00 pm

i just used the previous zip for mq and it works fine

newest zip borks it and i dont feel like figuring out how to fix it hehe.

dedpoet · Post by **dedpoet** » Thu Dec 09, 2004 2:33 pm

Mulletmaster, I fixed my toggle spam problem by doing 2 things. First, I revereted to the old blech.h. In theory, it should also work with today's new zip that Lax just updated, though I haven't tested yet. The second thing I did is actually kind of embarassing, but if you're using Cr4zyb4rd's code off of page 31 in this thread, make sure you include the second part of the macro located 2 posts below it. I missed that, so I was missing the entire subroutine section of the macro... /sigh

Rhev · Post by **Rhev** » Sat Dec 11, 2004 11:29 pm

For whatever reason, as of today when I try to use the leash function it just spams the hell out of me with "*Leashing is now OFF". I cant get it to work, and secondly, I cant figure out why it is spamming that line instead o just saying it once.

dedpoet · Post by **dedpoet** » Sun Dec 12, 2004 11:24 am

Rhev - grab the latest zip, or at least the blech.h from it, and recompile. It's a problem with the event handling and is fixed now. It's the exact same problem as the last 7 posts in this thread are talking about.

MeGoober · Post by **MeGoober** » Tue Dec 21, 2004 12:51 pm

I read everything again. I have reloaded RH from the current posted. I am running MQ2-20041219b and I still CTD. Everything looks fine until I target a mob...but it appears to be the second time I target a mob, not the first. I haven't started with the debuggers yet, I just came to see if others were having issues first. Does this sound like the blech issues?

Cr4zyb4rd · Post by **Cr4zyb4rd** » Tue Dec 21, 2004 12:59 pm

Doesn't sound like a blech issue to me. All indications are that the new blech is rock-solid.

Check your INI and make sure some garbage didn't get into it while things were still screwy, also make 100% sure that you rebuilt EVERYTHING including plugins like moveutils, as these are going to crash if they're compiled against the old structures (I'm betting this is the case here).

I used RH for a while on the 19th without any issues, even the item clicks seemed to be working.

MeGoober · Post by **MeGoober** » Tue Dec 21, 2004 1:20 pm

I didn't even think. I loaded the new MQ2 but forgot to update the solution. I am sure moveutils didnt get recompiled. Going to look now but I am sure thats the problem...thanks

Ok...all I can say is I earned that name! God I feel like flaming myself! That worked...sorry for the interruption....carry on....this is not the droid you were looking for.

Rogue Helper v6.0 [Complete Rogue Macro] (Updated: 10-26-04)

? or am i just stupid

Still having issues Cr4zy?

Ahhh damn