MacroQuest64

skyler wrote:Funny, I've never had that problem at all. Are you talking about while in combat you'll target the rogue or something else? I have it switch targets instead of sticking to 1, incase of adds, and my attack target % set to 98 and haven't seen what you mean. I thought there was a check somewhere that made sure what your were attacking wasn't a PC or pet.

I've seen similar weirdness from RH as well. In fact there's times where it just stops doing anything at all, and I have to restart it. I've since started using RD to handle my melees since MQ2AutoSkills covers everything I need to do except the Strike Disc and auto-discs, and I don't miss it much honestly. I'll probably code them in at some point, but Rogue DPS is pretty insane with just backstab and autoattack.

seems if i have sneak on, mq2 starts having a bunch of errors saying ability not ready.

I don't have autohs or autoevade on, just when autoattack/bs is on while sneak is on it has issues.

Also I never got autohs to work, after mob dies it just sits there, and I don't get messages for autoevade.

The only mod from download used was the dps manager with a popup message for bs's

dunno what's wrong with your copy, I run the stock RH and sneak/hide after fights works perfect.

skyler wrote:Funny, I've never had that problem at all. Are you talking about while in combat you'll target the rogue or something else? I have it switch targets instead of sticking to 1, incase of adds, and my attack target % set to 98 and haven't seen what you mean. I thought there was a check somewhere that made sure what your were attacking wasn't a PC or pet.

No, I have it set to stick on the first target the MA gets... my point is, why does the macro even accept the rogue as a target... or any other PC for that matter.

Would also like it to limit the range where it will target a mob within a limited range instead of just doing a /assist to get a target.

from what I've seen, it will target anything the MA has targeted, PC or otherwise, but it wont attack anything that's not an NPC. With MQ's ability to target anything in the zone regardless or where you are I doubt you'll be able to do anything with that range limit of assist. You'd have to have a target before you could compare how far it was. Unless you ran a check to see if the MA had a target, then checked for it to be an NPC and then get the distance of your MA's target compared to your own. Not sure why you'd need all of that honestly

at first used the download link at the first post, now i copy pasted the posts listing the code. same problems

have the /assist off
have sneak and hide abilities as buttons 3 and 4 hotkeys for when macro not running, and to evade manually.

and the /assist hotkey as:
/assist main
/echo seeking a victim...

didn't edit the underwater thing this time and still same issue. Maybe this rebuild of mq2 will fix.

post exactly what the error message says please

unless theres a debug option somewhere there is no message.

autoassist off by either hitting /autoass off or by mob dying, rogue sits there.

Does auto buff though.

The Errors your getting with sneak only thing I can think of is you dont have Sneak as a hot key on doabilitys. Alt + m and then find just abilitys and make sure that sneak is there and it will work fine. RH trys to take off sneak once you start to fight but if its not on a doability it just spams you saying it cant do it etc.

bingo, was on hotkey bank but not set on the abilities(or combat) menu

will see if that fixes whenever it is released, hope tonight =p but guessing weekend.

Used /mac rh for a long time now - BUT - since the beginning of this week it has not been assisting - nor properly leashed - nor hiding (sneak only will activate, hide will not).

If i move my toon forward/back/left/right a touch it will goto its master, but not automatically anymore.

If i select the tanks target and move it like above it will start to assist, but not auto anymore.

Any reason for the changes? I have even tried refreshing the macro - and replacing it......still not the same.

daveryann wrote:Used /mac rh for a long time now - BUT - since the beginning of this week it has not been assisting - nor properly leashed - nor hiding (sneak only will activate, hide will not).

If i move my toon forward/back/left/right a touch it will goto its master, but not automatically anymore.

If i select the tanks target and move it like above it will start to assist, but not auto anymore.

Any reason for the changes? I have even tried refreshing the macro - and replacing it......still not the same.

Did YOU change anything? Any other plugins? Any other include files? MACROQUEST ITSELF??

I've redone my rh files a few times and can't repeat the problem you are having. maybe your leash settings are to low or you aren't giving your rogue enough room to run around?

daveryann wrote:Used /mac rh for a long time now - BUT - since the beginning of this week it has not been assisting - nor properly leashed - nor hiding (sneak only will activate, hide will not).

If i move my toon forward/back/left/right a touch it will goto its master, but not automatically anymore.

If i select the tanks target and move it like above it will start to assist, but not auto anymore.

Any reason for the changes? I have even tried refreshing the macro - and replacing it......still not the same.

No havent changed anything - and my leash is @ 150-200 always......its almost as if i have to bumpstart him by moving him a little now to get it to start.

daveryann wrote:

daveryann wrote:Used /mac rh for a long time now - BUT - since the beginning of this week it has not been assisting - nor properly leashed - nor hiding (sneak only will activate, hide will not).

If i move my toon forward/back/left/right a touch it will goto its master, but not automatically anymore.

If i select the tanks target and move it like above it will start to assist, but not auto anymore.

Any reason for the changes? I have even tried refreshing the macro - and replacing it......still not the same.

No havent changed anything - and my leash is @ 150-200 always......its almost as if i have to bumpstart him by moving him a little now to get it to start.

If you haven't changed anything . . . then how is your MQ working?