Page 13 of 25
faster cast
Posted: Tue Aug 31, 2004 1:34 am
by rettus1
Im using this version
AFNuke.mac MQ2Data compliant and created by Azum
| Original Nuke sub 'borrowed' from Yalp
| INI and Exclude code shamelessly stolen from ml2517
| Original Manarobe code mostly stolen from ieatacid, refined by Azum
| 06/07/04 8:30pm
My ini looks like this
[Settings]
tankname=Kornorer
mainassist1=Kornorer
mainassist2=Kornorer
mainassist3=Kornorer
doassist=1
concuss=0
checkfamiliar=1
myfamiliar=22
engagedistance=150
stopnuke=35
mobhealth=93
shieldofmaelin=0
medtoggle=0
medpercent=95
manatomedup=100
harvestpercent=70
forceshield=1
manarobe=0
beginrobe=0
donerobe=0
tempstaff=1
staffhealth=95
stopnuke2=2
mainnuke=Ice Spear of Solist
endnuke=Agnarr's Thunder
startdisplay=1
mainnukegem=gem4
endnukegem=gem5
doharvest=1
spellshield=0
manaward=0
forcegem=gem3
harvestgem=gem1
maelingem=gem6
ssgem=gem5
manawardgem=gem2
hasele=0
myconcgem=gem1
usetimewand=0
useepic=1
checktarget=nocheck
concnum=2
mainnukenum=1
shawlofeternal=0
modrod=1
rodpercent=80
veilofinferno=0
celestialcloak=0
endnukenum=4
doxuzl=0
xuzlperc=85
dosnare=0
snareperc=15
snaregem=gem3
atenring=0
phylactery=0
eyeofdreams=0
celestear=0
emprobe=0
retry=3
maxbuffs=15
[Junk Buffs]
junkbuff1=Spirit of the Predator
junkbuff2=Spirit of the Predator
junkbuff3=Spirit of the Predator
junkbuff4=Spirit of the Predator
junkbuff5=Spirit of the Predator
What do i need to do to make it nuke faster? Maybe even chain nuke. I duo a wiz and a nec in HoH and its hard for the wiz to take agro from the nec =) . Any help is apreciated.
Posted: Tue Aug 31, 2004 3:36 am
by Azum
Looks like you have concussion disabled, so all the macro will do is chain nuke. What seems to be the problem?
LOL, I've had complaints that it nukes too fast and now complaints it nukes too slow. Can't make anyone happy.
Posted: Tue Aug 31, 2004 8:05 am
by Yalp
Azum wrote:Looks like you have concussion disabled, so all the macro will do is chain nuke. What seems to be the problem?
LOL, I've had complaints that it nukes too fast and now complaints it nukes too slow. Can't make anyone happy.
don't listen to em :) you are doing an awesome job.
they are just n00bs who don't know how to use it correctly
ps. thanks for the quick fix :)
Error
Posted: Tue Aug 31, 2004 1:39 pm
by tehman
Hey Azum.
Really nice work u have made to that macro, keep up the good work, but since the new update, I have bumped into this error, I guess its the same as Gaverok. Cause if I change it in my ini file not to use forceshield from time wand, it just goes on to ep legs and gives and error about them instead and so on. Any ideas what this could be?
Failed to parse /if command. Could not find command to execute.
afnuke2.inc@709 (ItemFinder(item)):/if
($(Me.Inventory[${equipslot}].Name.Equal[${item}]} ||
${Me.Inventory[${equipslot}s].Name.Equal[${item}]} ||
${Me.Inventory[${equipslot2}].Name.Equal[
afnuke.inc@799(AntiRetard):/call ItemFinder "Wand of Impenetrable Force"
afnuke.mac@256 (main): /call Antiretard
The current macro has ended
Posted: Tue Aug 31, 2004 1:53 pm
by Dadelot
There are a lot of those "Could not find command to execute" mistakes. Most of them are because of typos (blank line). I got a more complicated problem after I fixed those though. Something along : "The macro is already in another routine...".
I re copy/pasted the files and I have not re fixed the typos yet so I cannot give you the exact error.
Posted: Tue Aug 31, 2004 2:27 pm
by Azum
What are you guys using to copy and paste the macro? I'm not getting ANY of these errors. If I copy and paste from the board to notepad and save the files, I don't have to alter anything - it works right 'out of the box' for me.
I'm trying to track down the source of the problem right now, but I'm not able to reproduce an error.
Posted: Tue Aug 31, 2004 2:37 pm
by Azum
Dadelot wrote:There are a lot of those "Could not find command to execute" mistakes. Most of them are because of typos (blank line). I got a more complicated problem after I fixed those though. Something along : "The macro is already in another routine...".
I re copy/pasted the files and I have not re fixed the typos yet so I cannot give you the exact error.
I'm not sure I follow you here. How is a blank line a typo? It's a... blank line. The blank lines are there to seperate the subs of the macro, or separate parts of a sub, they aren't typos.
I'm not trying to be an asshole, I'm just trying to figure out what's causing the problem. I've been putting my time wand in a bag, in an inventory slot, and then back in primary - and regardless it gets clicked no problem as always.
Posted: Tue Aug 31, 2004 2:56 pm
by tehman
Okay got mine 2 work.
Just had to fix 2 blank lines, 1 in afnuke.inc and in afnuke2.inc, must have been a copy paste error from my side.
Keep up the good work Azum, oh btw we could use a Spellshield request also like the automated tl book. :)
Posted: Tue Aug 31, 2004 2:58 pm
by Azum
tehman wrote:Okay got mine 2 work.
Just had to fix 2 blank lines, 1 in afnuke.inc and in afnuke2.inc, must have been a copy paste error from my side.
Keep up the good work Azum, oh btw we could use a Spellshield request also like the automated tl book. :)
I'm looking it over now, this board (have I mentioned I hate this board?) seems to format the macro differently than it should be. I'm going through it now and trying to fix it. Maybe I should just get a host site for the macro and be done with this bullshit.
Posted: Tue Aug 31, 2004 3:08 pm
by tehman
Yeah I think u have mentioned that u hate this board a few times now , would be nice if u find a host site
Posted: Tue Aug 31, 2004 3:09 pm
by Azum
UPDATED afnuke.mac (first - updated 08/31)
UPDATED afnuke.inc (third post - updated 08/31)
UPDATED afnuke2.inc (seventh post - updated 08/31)
(08/31) - Tweaked Autosit a bit, it's now alot more picky about when it will sit and stand. I also went thru the macro on the board (the phpBB has some kind of funky formatting schematics going on) and fixed all the 'breaks' in the code it was creating. Please let me know if I missed any.
Posted: Tue Aug 31, 2004 3:29 pm
by Azum
I backed up my macro files, and deleted them from my macros folder. Now I'm copying and pasting directly from the board and resaving the files. I guess this is the only way to effectively test if the board decided to take a big shit on my macro after pasting a new version.
Yeah, a host site is sounding better and better.
Posted: Tue Aug 31, 2004 3:38 pm
by Azum
Alright, test passed. Recopied brand new files straight off the board and saved them accordingly, and no problems.
Posted: Tue Aug 31, 2004 5:25 pm
by Gaverok
Right off the board direct to note pad. Set INI file as it is in the one I posted previously:
Unparseable in Calculation: 'g'
spellcast.inc@101 (Cast(SpellName,ItemFlag,DismountFlag)):/if($(Target.ID)>0) /varset HaveTarget 1
afnuke2.inc@799 (RightClickITem(item)): /call cast"$(item)" item${checktarget}
afnuke2.inc@180 (Forceshield):
(${Macro.Return.Equal["EQUIPPED"]}) /call RightClickITem "Wand of Impenetrable Force"
afnuke2.inc@224 (Buffcheck): /call Forceshield
afnuke.mac@327 (main): /call Buffcheck
The current macro has ended.
Failed to parse /if condition '(NULL>0)`. non-numeric encountered
Posted: Tue Aug 31, 2004 5:30 pm
by Azum
Gaverok wrote:Right off the board direct to note pad. Set INI file as it is in the one I posted previously:
Unparseable in Calculation: 'g'
spellcast.inc@101 (Cast(SpellName,ItemFlag,DismountFlag)):/if($(Target.ID)>0) /varset HaveTarget 1
afnuke2.inc@799 (RightClickITem(item)): /call cast"$(item)" item${checktarget}
afnuke2.inc@180 (Forceshield):
(${Macro.Return.Equal["EQUIPPED"]}) /call RightClickITem "Wand of Impenetrable Force"
afnuke2.inc@224 (Buffcheck): /call Forceshield
afnuke.mac@327 (main): /call Buffcheck
The current macro has ended.
Failed to parse /if condition '(NULL>0)`. non-numeric encountered
Gav, your problem is in spellcast.inc
It seems nobody has bothered to update it so it's still got the phpBB format issues (It changed greater than symbols to > and less than symbols to <
You can either manually fix those, or use this one:
click me