Offsets 25-10

Nerfy · Post by **Nerfy** » Fri Oct 25, 2002 6:47 pm

Just because I haven't seen an update to the original, here's the listing from above incorporating all of the comments. And with this, /target works just fine. If I see tha the original poster edits then I'll remove this to prevent confusion.

2002.10.27 - Edit for Daylight Savings.

Code: Select all

[MacroQuest] 
MacroQuestVersion=IRC-20021023 
ClientName=eqgame 
ClientVersion=Fri Oct 25 02:07:xx 2002
ClientOverride=0
MacroQuestWinClassName=__MacroQuestTray
MacroQuestWinName=MacroQuest

[Function Locations]
WriteChatColor=0053459d
GetRaceByID=0052A16E
GetClassByID=00529C25
GetDeityByID=0052B085
LeftClick=0052DC41
RightClick=00542F85
ScreenItem=004AD080
ScreenSpawn=005434A1
NewUIINI=004347FC
MaxMana=004B6475
Commands=00541B43
CmdCleanup=00534570

[DirectInput8]
Main=007F077C
Keyboard=007F0780
Mouse=007F0784

[Memory Locations]
Zoning=007E0918
Zones=007E092C
Spawnheader=007E0930
Items=007E0934
Doors=007E0950
SpawnFooter=007E0964
Char=007E0978
CharInfo=007E0980
Target=007E0984
Guilds=007E112C
Packs=006347F8
Mouse=007F0788
Attack=007DE492
Spells=007ED148
CommandList=006037F0
DoAbilityList=007B76F8
DoAbilityAvailable=007B4C78
Group=00779260
GroupCount=00779118
HSliderItems=0077930C
HSliderMoney=0077C78C
PackPanel1=007E0A20
PackPanel2=007E0A24
clsMain=007E0A0C
clsItems=007E09A8
clsSpawns=007F0914
clsInvPanel=00098B78
clsMerchantPanelStatus=0005F310
clsMerchantItemBase=00063310
clsMerchantSelectedItem=00063388
clsMerchantSelectedSlotID=00063CEC
clsMainSpellRefresh=00000E18
clsMainSpellMemId=00000E98
clsMainSpellMemBar=00000E96
clsMainSpellMemGem=00063282

kozz · Post by **kozz** » Fri Oct 25, 2002 9:31 pm

Not working for me, hmm I'm using the new version of MQ and new offsets. Has anyone confirmed them?

Nerfy · Post by **Nerfy** » Fri Oct 25, 2002 9:33 pm

Works for me.

theafkxper · Post by **theafkxper** » Fri Oct 25, 2002 9:54 pm

works fine for me, have you installed active perl yet? if your on windows 9x you need to..
-afk

kozz · Post by **kozz** » Fri Oct 25, 2002 11:58 pm

Ok got it working

. Did some searching and found out I was missing the Pearl56.dll and just needed to add it to my System.~

macrolover · Post by **macrolover** » Sat Oct 26, 2002 5:36 am

irc 1024 has been released need to change the 23 in macroquest version to use the offsets with the new version

Nuad · Post by **Nuad** » Sat Oct 26, 2002 6:43 am

/click right equip <slot> causes the client to crash for me using this offsets.

Lurker_005 · Post by **Lurker_005** » Sat Oct 26, 2002 1:35 pm

/click left equip <slot> also seems to crash the client

(fish.mac will do it)

Better double check a few of those offsets

wassup · Post by **wassup** » Sat Oct 26, 2002 5:18 pm

When I run EQ the client crashes using these.

larz · Post by **larz** » Sat Oct 26, 2002 5:29 pm

Any help resolving my situation is appreciated.

I've dowloaded latest MQ and loaded the latest offsets.

When I log into EQ, it doesn't even say that Macroquest is active.

So, when i attempt a macro, it obviously doesn't even recognize the commands.

I havn't had this problem before. Usually, I can at least get MQ active.

I looked and do have the perl file in my MQ folder.

Any suggestions as to what is going wrong.

This problem didn't surface til after this latest patch.

Larz

LamahHerder · Post by **LamahHerder** » Sat Oct 26, 2002 7:56 pm

h , hail crash's me 8*(

Everguide · Post by **Everguide** » Sat Oct 26, 2002 9:17 pm

larz......having same problem

Didnt come up till last patch.

You find a way to fix it?

Everguide · Post by **Everguide** » Sat Oct 26, 2002 9:21 pm

QUOTE:

H'lo, I'm the architect of your suffering -- the Perl addon is my baby.

You are having problems for this reason:

The newest releases of MQ include my addon for the Perl scripting language (which is a very powerful and complicated scripting language that will let you do MANY things that the built-in MacroQuest scripting won't let you do). However, to do this, a DLL which includes the Perl scripting "engine" must be available on your system. By default, the MacroQuest install includes this DLL (Perl56.DLL).

The problem is, this is the Windows NT/2000/XP version of the DLL and will NOT work properly on 9x. Unfortunately, I don't really believe that Win9x is a fabulous platform for doing this kind of stuff and I have no plans to include the 9x version of Perl56.DLL in my updates. If Plaz decides to put the DLL in the drop he publishes, that's his business...

The workaround is, as stated, to download the Win 9x (also supports WinME I believe) version of ActiveState's Perl. You actually only really need the one file: Perl56.DLL. If someone wants to be proactive and publish that DLL on an FTP or web site (which may or may not violate ActiveState's license agreement), I'm sure the rest of the 9x community would love you.

But in the interim, I have a suggestion you probably won't like: if your hardware will support it, upgrade to XP. You'll be so much happier -- trust me :)

AMM
--------------------------------------------------

Ok so where can I get the file for ME?

Lurker_005 · Post by **Lurker_005** » Sun Oct 27, 2002 1:21 pm

I installed the perl msi, then copied the perl56.dll from the perl install to the MQ dir, but that wan't enough (before rebooting) I then rebooted and MQ worked with the above offsets (well referancing equipment slots causes EQ to lock up so an offset is probably wrong)

So it I am guessing you have to install pearl 5.6 for 9x/ME. Copy the perl56.dll file to the MQ dir overwriting the one there. Finally reboot windows.

Madman · Post by **Madman** » Sun Oct 27, 2002 4:03 pm

latest offsets everything appears ok tested a few small macros and all worked fine about every 8th time i hail a target i crash to desktop it is very intermitent..

Offsets 25-10

newer release than 1023

EQ Client crashes

Need some help

h , hail crash's me 8*(

larz